Direct Measurement of Wall-Shear Stress of Plane Shear Layer with Plasma Synthetic Jet Actuator

Abstract

One of the useful ways to measure the effect of the flow control devise is to use the wall-shear stress sensor to measure the wall-shear stress directly. The sensor used in this paper measures the wall-shear stress, which is reduced by the flow control devise. In this paper, the wall-shear stress of the plane shear layer with the plasma synthetic jet actuator (PSJA) is investigated. PSJA is a flow control device composed of electrodes with A.C. signal. The actuator uses electrohydrodynamic (EHD) effect and induces flow around the electrodes. PSJA has great advantage such as miniaturization, maintenance free, and easy to control compared to other actuators. In this paper, the wall-shear stress of plane shear layer in a low-speed turbulent wind tunnel is observed to measure the effect of the PSJA. The results show that the PSJA changes the flow condition of shear layer by accelerating the flow in shear layer. The wall-shear stress reduces and increases according to the displacement of the wall-shear stress sensor and the actuator.