Journal of the Japan Society of Powder and Powder Metallurgy
Online ISSN : 1880-9014
Print ISSN : 0532-8799
ISSN-L : 0532-8799
Paper
Fabrication of Anisotropic SmFeN Films using the Aerosol Deposition Method
Satoshi SugimotoToru HirayamaTomohito MakiToshio KagotaniKoichiro InomataJun Akedo
Author information
JOURNAL OPEN ACCESS

2006 Volume 53 Issue 3 Pages 258-262

Details
Abstract
Effect of an applied field during film deposition on magnetic properties of aerosol-deposited (AD) Sm-Fe-N films was investigated. By aligning the two magnets with facing the opposite poles, a magnetic field of 0.15 T can be applied perpendicular to the film. The thickness of AD film decreased with increasing applied field. However, relatively large thickness of 94 μm was obtained at 0.15 T. The remanence measured in the perpendicular direction increased from 54.5 to 61.3 Am2/kg by applying magnetic field. In the case of using a solenoid coil, a magnetic field of 0.21 T can be applied perpendicular to the film. The thickness of AD film also decreased, however, the AD film shows thickness of 65 μm at 0.21 T. The remanece in the perpendicular direction increased from 54.5 to 58.6 Am2/kg with increasing applied field. Therefore, it is concluded that the AD film can be oriented perpendicular to the film plane by applying a magnetic field and show high remanence with maintaining large thickness.
Content from these authors
© 2006 by Japan Society of Powder and Powder Metallurgy

本論文はCC BY-NC-NDライセンスによって許諾されています.ライセンスの内容を知りたい方は,https://creativecommons.org/licenses/by-nc-nd/4.0/deed.jaでご確認ください.
https://creativecommons.org/licenses/by-nc-nd/4.0/deed.ja
Previous article Next article
feedback
Top