Journal of the Japan Society of Powder and Powder Metallurgy
Online ISSN : 1880-9014
Print ISSN : 0532-8799
ISSN-L : 0532-8799
Paper
Corrosion Protection Characteristics of Magnesium Metal Bonded Magnet Containing Magnetic Powder
Satoshi SunadaTakuya TsugawaTetsuo AidaKatsuhiko Nishimura
Author information
JOURNAL OPEN ACCESS

2010 Volume 57 Issue 1 Pages 46-53

Details
Abstract

Zinc-coating and tin-coating have been used for improvement of the corrosion resistance of steels. Magnesium alloys of less noble metal could be also used as the sacrificial anodes. In this study, the extruded compacts composed of magnesium and Sm2Co7 of magnetic alloy were brought into contact with SS400 steel through the magnetic force of Sm2Co7, and the effect of their sacrificial anode was investigated by using the potentiodynamic polarization test, the corrosion test under constant quantity of electricity, the ICP measurement for the dissolved elements and the surface analysis on the specimens by XPS. The sacrificial anodic effect of the magnesium alloy with Sm2Co7 could not be recognized. However, the suppression of corrosion rate by magnesium alloy with Sm2Co7 brought into contact with steels was observed. This result suggests that the magnesium alloy is effective for the improvement of the corrosion resistance of steels.

Content from these authors
© 2010 by Japan Society of Powder and Powder Metallurgy

本論文はCC BY-NC-NDライセンスによって許諾されています.ライセンスの内容を知りたい方は,https://creativecommons.org/licenses/by-nc-nd/4.0/deed.jaでご確認ください.
https://creativecommons.org/licenses/by-nc-nd/4.0/deed.ja
Previous article Next article
feedback
Top