Article ID: 24-00017
Ultrafine-grained binderless cemented carbides using 0.4 µm WC particles were prepared by adding Cr3C2, VC, TaC, βt and various sizes of Ti(C,N) particles. SEM observations of the polished and fractured surfaces revealed that the WC grains became finer after the addition of the carbides or carbonitrides. In the Ti(C,N)-added binderless cemented carbides, the WC grains became finer with decreasing Ti(C,N) particle size and increasing Ti(C,N) content. The grain size of WC in the binderless cemented carbide containing 0.1 μm Ti(C,N) was comparable to that of the Cr3C2-containing binderless cemented carbide, although not as fine as that of the VC-containing binderless cemented carbide. The binderless cemented carbides containing fine Ti(C,N) grains were harder and had higher strengths than the other carbides. The combined addition of fine Ti(C,N) and Cr3C2 resulted in more homogeneous WC grains. These results indicate that the grain growth inhibition of binderless cemented carbides varies depending on the type and grain size of the added carbonitrides. These findings will contribute to the future development of binderless cemented carbides.
