Journal of the Japan Society of Powder and Powder Metallurgy
Online ISSN : 1880-9014
Print ISSN : 0532-8799
ISSN-L : 0532-8799
Effect of Binary Powder Mixing in Sintering of Fine Silicon Carbide
Hideyuki TsudaJunichi HojoAkio Kato
Author information
JOURNAL OPEN ACCESS

1984 Volume 31 Issue 1 Pages 1-7

Details
Abstract
Sintering behavior of binary mixture of SiC powders was investigated by using powders having average particle sizes d=0.01-0.02, μ and 0.04-0.45μ. Binary powder mixing had little effect on the green density of compact, but increased the density of sintered body, fired at 2050°C for 30 min, at the coarse powder fraction around 85%. For example, a powder mixture of 15% of fine powder having d=0.01μ and 85% of coarse powder having d=0.08 μ gave relative density of 98%, against the component fine and coarse powders gave relative density of 90% and 57%, respectively. Sinterability of binary mixture of 15% fine-85% coarse powders both of which were produced by CVD method increased with increase of particle size ratio and became constant above the ratio ≈8. This enhanced sinterability may be due to a particle rearrangement effect and a detardation of growth of coarse particles by the presence of fine powders in the course of heating.
Content from these authors
© Japan Society of Powder and Powder Metallurgy

本論文はCC BY-NC-NDライセンスによって許諾されています.ライセンスの内容を知りたい方は,https://creativecommons.org/licenses/by-nc-nd/4.0/deed.jaでご確認ください.
https://creativecommons.org/licenses/by-nc-nd/4.0/deed.ja
Next article
feedback
Top