Journal of the Japan Society of Powder and Powder Metallurgy
Online ISSN : 1880-9014
Print ISSN : 0532-8799
ISSN-L : 0532-8799
Microstructure and Mechanical Properties of Mullite-Sialon Composites
Chitake YamagishiHideto YoshidaHideto KamiakaJunji AsaumiNoboru Miyata
Author information
JOURNAL OPEN ACCESS

1990 Volume 37 Issue 2 Pages 367-370

Details
Abstract
Microstructure of the mullite - X-phase composites made by reaction of β-Sialon and mullite is the mixture of needle shaped particles (15μm) and fine particles (1μm). The amount of liquid phase in the composites decrease with increasing the amount of X-phase. Neither cracks nor liquid phase is obserbed at the boundary between X-phase and mullite. The flexural strength of the composites at 1300°C increases in proportion to the amount of β-Sialon addition and the composite with 10vol% β-Sialon keeps the same flexu ral strength thatmullite shows at room temparature. The fracture toughness of the composites at room temperature does not improved compered with that of mullite.
Content from these authors
© Japan Society of Powder and Powder Metallurgy

本論文はCC BY-NC-NDライセンスによって許諾されています.ライセンスの内容を知りたい方は,https://creativecommons.org/licenses/by-nc-nd/4.0/deed.jaでご確認ください.
https://creativecommons.org/licenses/by-nc-nd/4.0/deed.ja
Previous article Next article
feedback
Top