Journal of the Japan Society of Powder and Powder Metallurgy
Online ISSN : 1880-9014
Print ISSN : 0532-8799
ISSN-L : 0532-8799
Preparation of Particle-Dispersed Cu-Ti-B Alloy Powder by Mechanical Alloying
Toshimasa MorookaEiji YuasaOsamu Matsumoto
Author information
JOURNAL OPEN ACCESS

1992 Volume 39 Issue 3 Pages 202-205

Details
Abstract
Mixtures of copper, titanium and boron powders were mechanically alloyed for various periods of the milling by using an attritor ball mill. Microstructural changes of mechanically alloyed powders through the processing were investigated. Structure consisting of extremely fine grain is formed in either case of the mixed powders by the processing for long milling time. The refinement of Cu-Ti powder is accelerated by additions of boron and TiB2 powders. Solubility of titanium in copper phase of powder is about 2mol% after the mechanical alloying for more than 72.0ks, regardless of content of titanium. Intermetallic compound TiB2 is formed in the Cu-Ti-B system by the solid state reaction of titanium and boron during the processing for long milling time.
Content from these authors
© Japan Society of Powder and Powder Metallurgy

本論文はCC BY-NC-NDライセンスによって許諾されています.ライセンスの内容を知りたい方は,https://creativecommons.org/licenses/by-nc-nd/4.0/deed.jaでご確認ください.
https://creativecommons.org/licenses/by-nc-nd/4.0/deed.ja
Previous article Next article
feedback
Top