Journal of the Japan Society of Powder and Powder Metallurgy
Online ISSN : 1880-9014
Print ISSN : 0532-8799
ISSN-L : 0532-8799
Effect of Delubricating Conditions on Dimensional Change in Sintering of Fe-Based Powder Compacts
Jinsuke TakataNobuyasu Kawai
Author information
JOURNAL OPEN ACCESS

1994 Volume 41 Issue 9 Pages 1150-1156

Details
Abstract
The influence of delubricating conditions on dimensional change of the compacts of the system Fe-2wt%.Cu-0.8wty.C-0.75wt%.Zn-st was examined under an atmosphere of endothermic gas. An abnormal expansion, which increases under slower heat pattern and atmosphere of lower dew point, occurred above about 500°C. As this expansion becomes larger, copper growth decreases, the shrinkage becomes larger and carbon content after sintering becomes higher.The diffusion of carbon is greatly influenced by delubricating conditions but that of copper is little. The delubrication in Ar, N2, H2 and dissociated ammonia atmosphere makes the sintering behaviors and sintered properties stable. In the case of endothermic gas, the similar tendency is observed at the rapid delubrication under the high dew point atmosphere.
Content from these authors
© Japan Society of Powder and Powder Metallurgy

本論文はCC BY-NC-NDライセンスによって許諾されています.ライセンスの内容を知りたい方は,https://creativecommons.org/licenses/by-nc-nd/4.0/deed.jaでご確認ください.
https://creativecommons.org/licenses/by-nc-nd/4.0/deed.ja
Previous article Next article
feedback
Top