Journal of the Japan Society of Powder and Powder Metallurgy
Online ISSN : 1880-9014
Print ISSN : 0532-8799
ISSN-L : 0532-8799
Impact Consolidation of Mixed Copper and Carbon Powders Mechanically Alloyed
Toshimi YamaneHirotaka OkuboNobuhiro OkiKoji HisayukiMasaaki KonishiYoritoshi MinaminoYuichiro KoizumiMitio KiritaniMasao KomatsuSung Jin Kim
Author information
JOURNAL FREE ACCESS

2001 Volume 48 Issue 1 Pages 9-14

Details
Abstract

Mixed copper and carbon powders were mechanically alloyed (MA) in a planetary ball mill. The supersaturated solid solubility of carbon in MA copper was 25at%C which was determined from lattice parameter change. The supersaturated copper powder consolidated by static compression of 1.4 GPa, has the relative density of 95%, and Vickers hardness of 121. Otherwise, that consolidated dynamically by a bullet of 90.1 g at the speed of 38.1 m/s after 0.4 GPa static compression, has the relative density of 96.3%, and Vickers hardness of 200. Keeping the MA effect more than half, MA powders could be consolidated by impact pressure.

Content from these authors
© Japan Society of Powder and Powder Metallurgy
Previous article Next article
feedback
Top