2007 Volume 1 Issue 10 Pages 1209-1218
BMC (Bulk Molding Compound) is composed of UP (Unsaturated Polyester) resin, glass fibers, and bagasse fibers which have been obtained after squeezing sugar cane. Our purpose is to use the bagasse fibers as reinforcement and filler in BMC to fabricate composites by injection molding and injection compression molding. The mechanical properties of injection molding composites were improved after adding the bagasse fibers. Observing the fracture surface of the tensile test specimen through SEM, we could notice the glass fibers were penetrated into the bagasse fibers longitudinally. Along with UP resin solidifying, the glass fibers were firmly fixed in the bagasse fibers and finally united with them. This phenomenon could bring on the same effect as the glass fibers length was prolonged, so that the adhesion interface between fiber and matrix resin became larger, which leads to the increase in the mechanical properties. Otherwise, it was observed that UP resin sufficiently permeated the bagasse fibers and solidified. This also contributes to enhancing the mechanical properties drastically.
