Journal of Robotics and Mechatronics
Online ISSN : 1883-8049
Print ISSN : 0915-3942
ISSN-L : 0915-3942
Special Issue on Wearable Robotics and Mechatronics Technology
TasKi: Overhead Work Assistance Device with Passive Gravity Compensation Mechanism
Yasuyuki YamadaHirokazu ArakawaTaro WatanabeShunya FukuyamaRie NishihamaIsao KikutaniTaro Nakamura
Author information
JOURNAL OPEN ACCESS

2020 Volume 32 Issue 1 Pages 138-148

Details
Abstract

During overhead work, workers need to keep raising weights of approximately 2 to 4 kg with the muscular strength of their upper limbs, and the burden of this work is high. Therefore, we developed an assistive device, named TasKi, using a self-weighted compensation mechanism to reduce the burden on upper limbs during overhead work. It can compensate for upper limb weight using the force of a spring in various postures of the upper limbs, without a battery. In this study, to provide effective assistance to many users, we clarified the crucial assistance and parameter adjustment range of settings corresponding to physical differences. First, the assistive force value of TasKi to reduce the work burden of each user was confirmed via a subjective evaluation experiment and myoelectric potential measurements. Next, we conducted a test survey of TasKi users and investigated the relationship between physique and the wearing feeling. According to the survey, 80% of the subjects provided favorable opinions on the assistive method used by TasKi. Finally, we had subjects of various physiques wear the device and investigated the relationship between physique and the wearing feeling with respect to shoulder joint movements. It was observed that the subjects with greater shoulder widths experienced difficulties when moving in the direction of internal-external rotation because of the small size of TasKi. The influence on the ease of motion and perception of size was less in the direction of flexion-extension and adduction-abduction motions.

Content from these authors

This article cannot obtain the latest cited-by information.

© 2020 Fuji Technology Press Ltd.

This article is licensed under a Creative Commons [Attribution-NoDerivatives 4.0 International] license (https://creativecommons.org/licenses/by-nd/4.0/).
The journal is fully Open Access under Creative Commons licenses and all articles are free to access at JRM Official Site.
https://www.fujipress.jp/jrm/rb-about/
Previous article Next article
feedback
Top