Aerial Manipulator Control Method Based on Generalized Jacobian

Abstract

This paper describes a control method for an aerial manipulator on an unmanned aerial vehicle (UAV) by using a generalized Jacobian (GJ). Our task is to realize visual check of bridge inspection by employing a UAV with a multi-degree-of-freedom (DoF) manipulator on its top. The manipulator is controlled by using the GJ. Subsequently, by comparing the aerial manipulator control with a conventional Jacobian experimentally, we discovered that the accuracy of the control improved by applying the GJ. The manipulator has three DoFs in the X-Z plane of the UAV coordinate system. The experiment shows that the manipulator controlled with the GJ can compensate for the pose error of the body by 54.5% and 47.7% in the X- and Z-axes, respectively.