International Journal of Automotive Engineering
Online ISSN : 2185-0992
Print ISSN : 2185-0984
ISSN-L : 2185-0992
Research Paper
Evaluation of Wear Characteristics for Coating on SKD11 Substrate with Advanced High Strength Steel
Young-Suk KimJin-Jae Kim
Author information
JOURNAL OPEN ACCESS

2016 Volume 7 Issue 4 Pages 121-126

Details
Abstract

Recently Ultra High Strength Steel sheet (UHSS) has been adopted in automotive stamping industry to reduce the weight and enhance the safety of automobile. However, the application of the UHSS sheet faced some difficulty such as die wear and related problems due to high contact pressure on the die surface during the stamping process. In this study, wear tests of pin-on-disc (POD) type were performed to evaluate wear characteristics for the UHSS sheets under dry and lubricated conditions. For five kinds of coatings (TiCN, CrN, TiAlCrN, TiN and TD) on the SKD11 substrate and the uncoated substrates, wear resistances of those die materials under relatively contact sliding with three UHSS sheets was evaluated by the wear chacteristics; the wear mass loss, the curve between the coefficient of friction, sliding distance, and galling initiation distance. Among those coatings, the CrN coating shows the best anti-wear performances, respectively.

Information related to the author
© 2016 Society of Automotive Engineers of Japan, Inc
Previous article Next article
feedback
Top