Journal of Japan Society of Civil Engineers, Ser. B1 (Hydraulic Engineering)
Online ISSN : 2185-467X
ISSN-L : 2185-467X
Annual Journal of Hydraulic Engineering, JSCE, Vol.58
ACCURACY OF VELOCITY AND DISCHARGE MEASUREMENTS BY USING RADIO CURRENT METER
Daisuke NEGISHIYasuo NIHEINaoya KATAYAMAJin KASHIWADA
Author information
JOURNAL FREE ACCESS

2014 Volume 70 Issue 4 Pages I_625-I_630

Details
Abstract
In the present study, we examined the fundamental performance of a radio current meter (RCM) for velocity and discharge measurements. For this purpose, we conducted field measurements using RCM, ADCP and ADV (Acoustic Doppler Velocimeter) in the Edogawa River under low- and high-flow conditions. Laboratory experiments in an open channel with wind tunnel were performed to compare velocity and discharge measured by RCM, pitot tube and float. The results indicate that the velocity measured by the RCM was almost comparable to that by floats, showing that the measurement depth of the RCM corresponds to the draft of float (<5 mm). It is also found that the discharge using the RCM and standard coefficient of float (=0.85) were in good agreement with the experimental data.
Content from these authors
© 2014 Japan Society of Civil Engineers
Previous article Next article
feedback
Top