1970 Volume 13 Issue 65 Pages 1358-1365
This paper deals with the decision of pass schedule of roller in conventional simple spinning. It is important to control the deformation mode of blank by an excellent pass schedule of roller, lest the sheet metal should be wrinkling or fracturing. At first, the authors attempt to draw in sheet metal by four fundamental types of template, namely-linear shape template (revolved and inside shifted type) and circular shape template (outside and inside shifted type). From the experimental results of these types, an involute curve is proposed for the profile of template. According to the test result of the new involute template, it is evident that the height of spun cups can be controlled freely by the alteration of working conditions, and the limit drawing ratio is best improved. The authors obtain the drawing ratio of 2.5 when t0/d=1.25.
JSME International Journal Series C Mechanical Systems, Machine Elements and Manufacturing
JSME International Journal Series B Fluids and Thermal Engineering
JSME International Journal Series A Solid Mechanics and Material Engineering
JSME international journal. Ser. C, Dynamics, control, robotics, design and manufacturing
JSME international journal. Ser. 3, Vibration, control engineering, engineering for industry
JSME international journal. Ser. A, Mechanics and material engineering
JSME international journal. Ser. 1, Solid mechanics, strength of materials