1961 Volume 4 Issue 15 Pages 621-629
Burning characteristics of an extremely high ash coal, of which the calorific value is about 2000 kcal/kg, was tested by pulverized fuel combustion with a dry system. A special test furnace was designed which would be most adequate for the combustion of such a high ash coal. From the test, results obtained are as follows : 1) High combustion rate can be expected even from shales of 65∼75% ash, with high combustion efficiency. 2) To get stable combustion of low grade coal in a dry system, the furnace wall temperature must be kept in an adequate range, 750∼1100°C.
JSME International Journal Series C Mechanical Systems, Machine Elements and Manufacturing
JSME International Journal Series B Fluids and Thermal Engineering
JSME International Journal Series A Solid Mechanics and Material Engineering
JSME international journal. Ser. C, Dynamics, control, robotics, design and manufacturing
JSME international journal. Ser. 3, Vibration, control engineering, engineering for industry
JSME international journal. Ser. A, Mechanics and material engineering
JSME international journal. Ser. 1, Solid mechanics, strength of materials