The Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics
Online ISSN : 2424-2837
2019
Session ID : 1008B0915
Conference information

Experimental Study on the Mechanical Behavior of Interfacial Transition Zone in Concrete Coupling of SEM and DIC
Dong LeiJintao HeFeipeng ZhuPengxiang Bai
Author information
CONFERENCE PROCEEDINGS FREE ACCESS

Details
Abstract

With the combination of scanning electron microscope (SEM) and digital image correlation (DIC), the mechanical properties of interfacial transition zone (ITZ) in concrete are experimentally studied. The morphology of the ITZ is captured by SEM under compressive load, and from the recorded images the deformation of the ITZ is analyzed. After that, the distribution of the nominal compressive elastic modulus of the ITZ is obtained along the distance from the aggregate to the mortar, which can be used to characterize the size of the ITZ with the strain contour. A conclusion can be draw that the area where the nominal compressive elastic modulus is obviously less than that of the aggregate and mortar can be defined as the ITZ. With increasing distance from the aggregate boundary, the nominal compressive elastic modulus of the ITZ decreases first and then increases, and at the sides close to the aggregate and mortar, the nominal compressive elastic modulus of the ITZ gradually tends to that of the two materials. Finally, the relationship between the average nominal compressive elastic modulus and the distance from the aggregate boundary can be fitted by two order polynomial function, which can be used to describe the mechanical properties of the ITZ.

Information related to the author
© 2019 The Japan Society of Mechanical Engineers
Previous article Next article
feedback
Top