The Proceedings of the Dynamics & Design Conference
Online ISSN : 2424-2993
2016
Session ID : 324
Conference information

Identification of virtual source and application for noise reduction design
Yusuke SAITOIkuma IKEDANobuyuki IWATSUKI
Author information
CONFERENCE PROCEEDINGS FREE ACCESS

Details
Abstract

In the case that unknown force excites the vibrating structure, the virtual exciting forces at any points are calculated from a number of measured accelerations on structure in the condition that actual vibration state is the same. In that the sound radiation power caused by the virtual exciting forces is set as an objective function, the noise reduction design is performed. In that time, the excitation sources of the virtual exciting forces are modeled and the parameters of excitation source model are identified from change in the measured accelerations in the case of structure change caused by added mass and stiffness. Identified parameters of the excitation source enable the structural optimization to reduce the radiated noise considering the change in the virtual exciting force caused by the structural change. For example, proposed method is applied to the optimal rib location enables to reduce noise in the case that the cantilever rectangular plate is excited by a lumped exciting force.

Content from these authors
© 2016 The Japan Society of Mechanical Engineers
Previous article Next article
feedback
Top