Host: The Japan Society of Mechanical Engineers
Name : [in Japanese]
Date : November 12, 2022 - November 13, 2022
This paper describes the flow characteristics of air injected from a slit nozzle in a cylindrical container. The numerical simulation was performed by the large-eddy simulation (LES) using ANSYS Fluent 19.0 based on the finite-volume method. The non-dimensional nozzle offset distance was set to yn/D = 0.4, where D is the diameter of the cylindrical container. The Reynolds number of the plane jet flow was settled at 2,000. The velocity profiles by the numerical simulation agreed with the experimental results. The jet reached near the bottom of container, and the jet flowed out from the left side of container. Although the flow in the cylindrical container showed a three-dimensional turbulent flow structure, the mean velocity field was generated symmetrically with respect to the central cross-section of the container perpendicular to the slit nozzle. The large recirculating flow around the z-axis occurred near the central cross-section of the container by the jet. In addition, the weak recirculated flows around the y-axis were observed near the upper side wall in the container.
