The Proceedings of Conference of Kanto Branch
Online ISSN : 2424-2691
ISSN-L : 2424-2691
2008.14
Session ID : 21302
Conference information
21302 A friction characteristic of MoS_2 dispersion Al system composite material by compression shearing method and rotation solidifying method
Kazuya KATONoboru NAKAYAMAHiroyuki MIKIHiroyuku TAKEISHI
Author information
CONFERENCE PROCEEDINGS FREE ACCESS

Details
Abstract
This paper reports on the fabrication of MoS_2-dispersed Al-Si-Cu-Mg alloy composite by the compression shearing method and rotation solidifying method. The friction coefficient, wear width and vickers hardness of MoS_2-dispersed aluminum composite are investigated. To examine the friction properties, friction tests were carried out by the pin-on-disk method. The pin used was made of stainless steel (SUS304), and had a spherical surface of 4 mm diameter in the head. The conditions of friction test were 0.2 N, 1.7 mm/s. The result shows the addition of MoS_2 to matrix systems reduces the friction coefficient.
Content from these authors
© 2008 The Japan Society of Mechanical Engineers
Previous article Next article
feedback
Top