Host: The Japan Society of Mechanical Engineers
Name : [in Japanese]
Date : September 11, 2022 - September 14, 2022
A creep constitutive equation incorporating the effect of microstructure coarsening was introduced into the Finite Element Method analysis using a user subroutine to predict thermal fatigue life of solder joint. Dispersed particles in the microstructure grew due to thermal diffusion with increasing fatigue cycles, which resulted in the inelastic strain range and the inelastic strain energy density range increased. This increase in the inelastic strain range reduced the fatigue life by approximately 77% compared to the case where no microstructure coarsening effect was incorporated. Thus, it is necessary to incorporate the microstructure coarsening effect in the fatigue analysis of solders. Thermal fatigue life was found to be significantly affected by the microstructure coarsening effect. Thus, it is necessary to incorporate the microstructure coarsening effect in the fatigue analysis of solders.
