G0301-4-2 The Load Distribution of the Taper Screw Structure in the High-pressure Facilities : Case of valve nozzle extracts gas

Abstract

One of the design methods for closing the end of a pressure cylinder is to screw down a screw plug on the threaded end of the cylinder. In this case, these is the problem of stress concentration in the threaded end of the pressure cylinder. To solve the problem, it is necessary to know accurately the load distribution on the threaded end of the cylinder. To find the load distribution on the threaded end of the pressure cylinder engaged with the taper screw plug, the following experiments are carried out. Applying the compressive load between the plug and the pressure cylinder and regarding the situation above as equivalent to the situation in which the internal pressure is applied, the load distribution is measured with the strain gauge. The effect of taper screw structure of engaged thread on the load distribution on the threaded end of pressure cylinder is presented and an expansion of design manual is discussed.