Abstract
Two types of twin roll caster for casting of fiber inserted composite strip were devised. One is a method using a downward melt drag twin roll caster. It was possible to cast fiber inserted the strip. The fiber was inserted the strip through the puddle formed on the lower roll. Another is a method which was combined the downward melt drag twin roll caster and the melt drag twin roll caster. This method could cast fiber inserted clad strip by pouring different alloy for each nozzle. The fiber inserted composite strip could be cold rolled. The reduction of the fiber and the strip was almost equal. The gap between the fiber and the strip could be improved by the rolling. Reaction between the fiber and the strip was investigated using EPMA.
