The Proceedings of the Thermal Engineering Conference
Online ISSN : 2424-290X
2021
Session ID : 0080
Conference information

Measurement of Flame Holding Characteristic of Lifted Flame Established by Fuel Micro-jets
*Kazuki WatanabeTaro Hirasawa
Author information
CONFERENCE PROCEEDINGS RESTRICTED ACCESS

Details
Abstract

Methane was issued from six nozzles with an inner diameter of 0.7 mm placed at each vertex of a regular hexagon to establish a lifted flame, of which flame holding characteristics were investigated. It was found that the lifted flames on the burner of six-nozzle with nozzle pitch from 8 mm to 14 mm, where the lifted flame was held on the center axis of six fuel jets, were more difficult to blow-off than a single nozzle burner. In the burners with nozzle pitch from 4 to 14 mm, the burner with nozzle pitch of 10 mm was the most difficult to blow-off and stably held in a relatively wide range of exit flow velocity, from 20 to 170 m/s.

Content from these authors
© 2021 The Japan Society of Mechanical Engineers
Previous article Next article
feedback
Top