Journal of the Society of Materials Science, Japan
Online ISSN : 1880-7488
Print ISSN : 0514-5163
ISSN-L : 0514-5163
Original Papers
Influence of Short-Time Duplex Heat Treatment on Fatigue Strength of Ti-6Al-4V Alloy
Tatsuro MORITAKosuke SHINODAKazuhiro KAWASAKIYositaka MISAKA
Author information
JOURNAL FREE ACCESS

2007 Volume 56 Issue 4 Pages 345-351

Details
Abstract
Influence of short-time duplex heat treatment on the fatigue strength of α + β titanium alloy Ti-6Al-4V was investigated. When the alloy was solution-treated for 60s at 1203K and water-quenched, prior β phase was hardened since a part of this phase was transformed to acicular α' martensite phase. With subsequent aging for 40s at 753∼903K, fine α phase was precipitated in retained β phase so that hardness of prior β phase further increased. Such hardening of prior β phase remarkably improved the fatigue strength of the alloy as well as its yield stress and tensile strength. That was because slip in primary α phase, where would be fatigue crack initiation sites, was restricted by hardened prior β phase so that fatigue crack initiation was suppressed to high stress amplitude level. In the examined treatment conditions, the combination of the above short-time solution treatment and aging for 40s at 803K was suitable to improve the strengths. In this case, the tensile strength and fatigue strength were increased by 29% and 22%, respectively. At the same time, ductility was also increased by 10% due to stress-induced martensitic transformation of retained β phase.
Content from these authors
© 2007 by The Society of Materials Science, Japan

この記事はクリエイティブ・コモンズ [表示 - 非営利 - 改変禁止 4.0 国際]ライセンスの下に提供されています。
https://creativecommons.org/licenses/by-nc-nd/4.0/deed.ja
Previous article Next article
feedback
Top