Creep-Fatigue Interaction on Small Crack Propagation in a Single Crystal Superalloy under Thermomechanical Fatigue Condition

Abstract

Recently, the high-efficiency gas turbine combined cycle power generation has become essential in operation as a backup power supply of renewable energy sources. In turbine blades and vane of the gas turbine operated as a backup power supply, there is growing concern about the damage due to thermo-mechanical fatigue (TMF) loading because of expecting increased starting/stopping cycle and frequent load fluctuation. This study investigated the small crack propagation behavior in single crystal Ni-based superalloy under the in-phase TMF loading cycle. The creep-fatigue interaction on the small crack propagation behavior was discussed based on the relationship between the crack growth rate and the creep J-integral, considering the small-scale creep at the crack tip. The experimental results indicated that the crack growth rates under the in-phase TMF loading cycle were significantly higher than those under the out-of-phase TMF condition at a given fatigue J-integral range. In addition, introducing the tension holding at the maximum temperature in the in-phase TMF loading cycle accelerated the crack growth rates. The small-scale creep stress field at the crack tip might dominate the small crack propagation behavior under the in-phase TMF loading with the high-temperature holding as the creep-fatigue interaction.