Published: August 15, 1981Received: -Available on J-STAGE: June 03, 2009Accepted: April 21, 1981
Advance online publication: -
Revised: -
Correction information
Date of correction: June 03, 2009Reason for correction: -Correction: TITLEDetails: Wrong : LECTURE Right : Computer Aided Design on Composite Materials
Date of correction: June 03, 2009Reason for correction: -Correction: SUBTITLEDetails: Right : I. Flow State in the Forging Die during the Molding Process
Date of correction: June 03, 2009Reason for correction: -Correction: AUTHORDetails: Right : T. Hirai1)
Date of correction: June 03, 2009Reason for correction: -Correction: AFFILIATIONDetails: [in Japanese]
Date of correction: June 03, 2009Reason for correction: -Correction: CITATIONDetails: Right : 2) Hirai, T., and T. Katayama, Proc. of the 2nd Int. Conf. on Composite Materials, p. 1283 (1978). 3) Hirai, T., T. Katayama, and H. Hamada, “Advance in Composite Materials”, p. 1606 (1980) Pergamon Press 6) Tadmor, Z., E. Broyer, and C. Gutfinger, Polym. Eng. Sci., 44, 660 (1974). 7) Broyer, E., C. Gutfinger, and Z. Tadmor, Trans. Soc. Pheol., 19, 423 (1976). 8) Harlow, F. H., and J. E. Welch, The Physics of Fluids, 8, 2182 (1965). 12) Pervadchuk, V. P., and V. I. Yankov, Heat Transfer-Soviet Research, 10, 1, 11 (1978). 13) Myers, F. A, and J. M. Maxel, Tech. Proc. 33rd Annal Conf. SPI 19-D (1978).
