塑性加工の力学的解析 4. 加工限界の解析

北川 浩

doi:10.2472/jsms.34.877

Plasticity in Metal Forming

4. Analysis of Forming Limit

H. Kitagawa

Author information

JOURNAL FREE ACCESS

1985 Volume 34 Issue 382 Pages 877-883

DOI https://doi.org/10.2472/jsms.34.877

Details

Published: July 15, 1985 Received: - Available on J-STAGE: June 03, 2009 Accepted: November 16, 1984 Advance online publication: - Revised: -
Correction information
Date of correction: June 03, 2009 Reason for correction: - Correction: TITLE Details: Wrong : LECTURE
Right : Plasticity in Metal Forming

Date of correction: June 03, 2009 Reason for correction: - Correction: SUBTITLE Details: Right : 4. Analysis of Forming Limit

Date of correction: June 03, 2009 Reason for correction: - Correction: AUTHOR Details: Right : H. Kitagawa¹⁾

Date of correction: June 03, 2009 Reason for correction: - Correction: AFFILIATION Details: [in Japanese]

Date of correction: June 03, 2009 Reason for correction: - Correction: CITATION Details: Right : 1) W. Johnson and A. G. Mamalis, Proc. 17. Machine Tool Des. & Res. Conf., 607 (1977).
2) W. Johnson, Proc. ICM3, Vol. 1, 167 (1979).
3) J. W. Hutchinson and J. P. Miles, J. Mech. Phys. Solids, 22, 61 (1974).
4) R. Hill and J. W. Hutchinson, J. Mech. Phys. Solids, 23, 239, (1975).
7) Needleman and J. R. Rice Mechanics of Sheet Metal Forming (ed. by D. P. Koistinen and N. -M. Wang), p. 237 (1978) Plenum Press.
8) S. Stören and. J. R. Rice, J. Mech. Phys. Solids, 23, 421 (1975).
9) J. L. Sanders, Proc. 2. U. S. Nat. Congr. Appl. Mech., 455 (1955).
10) J. W. Hutchinson and K. W. Neale, Mechanics of Sheet Metal Forming (ed. by D. P. Koistinen and N. -M. Wang), p. 465 (1978) Plenum Press.
11) J. Christoffersen and J. W. Hutchinson, J. Mech. Phys. Solids, 27, 465 (1979).
14) J. W. Rudnicki and J. R. Rice, J. Mech. Phys. Solids, 23, 371 (1975).
15) J. R. Rice, Theoretical and Applied Mechanics (ed. by W. T. Koiter), p. 207 (1976) North-Holland.
17) V. Tvergaard, J. Mech. Phys. Solids, 30, 399 (1982).
18). J. W. Hutchinson, Proc. 8. U. S. Nat. Congr. Appl. Mech., 87 (1979).
19) V. Tvergaard, Int. J. Solids struct., 18, 659 (1982).
20) V. Tvergaard and A. Needleman, Acta Met., 32, 157 (1984).
21) H. W. Swift, J. Mech. Phys. Solids, 1, 1 (1952).
22) R. Hill, J. Mech. Phys. Solids, 1, 19 (1952).
23) A. Marciniak and K. Kuczynski, Int J. Mech. Sci., 9, 609 (1967).
26) J. W. Hutchinson and V. Tvergaard, Int J. Mech. Sci., 22, 339 (1980).
29) J. W. Hutchinson and K. W. Neale, Acta Met., 25, 839 (1977).
30) J. W. Hutchinson and K. W. Neale, Mechanics of Sheet Metal Forming (ed. by D. P. Koistinen and N. -M. Wang), p. 269 (1978) plemun Press.

Corresponding author

Correction information

Register with J-STAGE for free!