Published: July 15, 1986Received: -Available on J-STAGE: June 03, 2009Accepted: November 06, 1985
Advance online publication: -
Revised: -
Correction information
Date of correction: June 03, 2009Reason for correction: -Correction: TITLEDetails: Wrong : LECTURE Right : Fatigue-Foundamental Aspects and Design Application
Date of correction: June 03, 2009Reason for correction: -Correction: SUBTITLEDetails: Right : 6. Fatigue of FRP and Ceramics
Date of correction: June 03, 2009Reason for correction: -Correction: AUTHORDetails: Right : T. Tanimoto1), T. Hoshide2)
Date of correction: June 03, 2009Reason for correction: -Correction: AFFILIATIONDetails: [in Japanese]
Date of correction: June 03, 2009Reason for correction: -Correction: CITATIONDetails: Right : 1) J. B. Sturgeon, Proc. 28th Annual Technical Conf., SPI, Sec. 12-B, 1 (1973). 2) T. Tanimoto and S. Amijima, J. Composite Materials, 9, 380 (1975). 3) J. Awerbuch and H. T. Hahn, ASTM STP 636, 248 (1977). 4) H. T. Hahn and L. Lorenzo, ICF-6, 549 (1984). 5) R. Talreja, Proc. Roy. Soc., London, A378, 461 (1981). 6) W. W. Stincomb and K. L. Reifsnider, ASTM STP 675, 762 (1979). 7) J. N. Yang and D. C. Jones, J. Composite Materials, 12, 371 (1978). 8) T. Tanimoto and S. Amijima, Proc. 29th Annual Technical Conference, SPI, Section 17-B, 1 (1974). 9) W. W. Stincomb and K. L. Reifsnider, ASTM STP 675, 762 (1979). 10) S. M. Bishop and J. Morton, ICF-6, 3069 (1984). 12) J. C. Halpin, et al., AFML-TR-72-289, W-PAFB (1972). 13) H. T. Hahn and R. Y. Kim, J. Composite Materials, 9, 297 (1975). 14) J. N. Yang and M. D. Liu, J. Composite Materials, 12, 176 (1977). 15) J. N. Yang, ASTM STP 617, 272 (1977). 16) T. Tanimoto, H. Isikawa, S. Amijima and H. Kimura, Proc. ICM-4, 1, 539 (1983). 17) T. Tanimoto and H. Isikawa, Proc. ICOSSAR-4, 1, 415 (1985). 19) S. Itsutsuji, T. Fujii and Z. Maekawa, Proc. ICCM-4, 761 (1982). 20) L. J. Broutman and S. Sahu, ASTM STP 497, 170 (1972). 21) T. Tanimoto, S. Amijima and H. Ishikawa, Proc. Japan-US Conference on Composite Materials, 145 (1981). 22) M. S. Rosenfeld and S. L. Huang, J. Airraft, 15, 264 (1978). 23) M. M. Ratwani and H. P. Kan, Proc. AIAA/ASME ASCE/AHS 24th Structures, Structural Dynamics and Materials Conference, 275 (1983). 24) T. Tanimoto, S. Amijima and T. Matsuoka, Proc. ICCM-5, 199 (1986). 26) T. Tanimoto, S. Amijima and H. Ishikawa, Proc. ICM-3, 207 (1979). 28) T. Shimokawa and Y. Hamaguchi, Proc. ICCM-4, 717 (1982). 29) T. Fujii, T. Fukuda and K. Osaka, Proc. ICCM-5, 141 (1985). 34) R. W. Davidge and G. Tappin, Proc. Brit. Ceram. Soc., 15, 47 (1970). 35) R. Kossowsky, J. Amer. Ceram. Soc., 56, 531 (1973). 36) A. G. Evans and E. R. Fuller, Metal. Trans., 5, 27 (1974). 37) A. G. Evans, L. R. Russell and D. W. Richerson, Metal. Trans., 6A, 707 (1975). 39) D. A. Krohn and D. P. H. Hasselman, J. Amer. Ceram. Soc., 55, 208 (1972). 40) C. P. Chen and W. J. Knapp, “Fracture Mechanics of Ceramics”, Vol. 2, R. C. Bradt et al., eds., p. 691 (1973) Plenum Press, New York. 41) F. Guiu, J. Mater. Sci., 13, 1357 (1978). 42) A. G. Evans and M. Linzer, Int. J. Fract., 12, 217 (1976). 43) A. G. Evans, Int. J. Fract., 16, 485 (1980). 46) S. Ito, Y. Yama-uchi, M. Ito and S. Sakai, Proc. 26th Japan Congr. Mater. Res., p. 270 (1983). 48) T. Yamada and T. Hoshide, Proc. ICOSSAR '85, Vol. II, II-441 (1985). 51) T. Hoshide, H. Furuya, Y. Nagase and T. Yamada, Int. J. Fract., 26, 229 (1984). 52) A. G. Evans and S. M. Wiederhorn, Int. J. Fract., 10, 379 (1974). 53) N. Kamiya and O. Kamigaito, J. Mater. Sci., 16, 828 (1981). 54) C. G. Annis and J. S. Cargill, “Fracture Mechanics of Ceramics”, Vol. 4, R. C. Bradt et al., eds., p. 737 (1978) Plenum Press, New York.