Published: April 15, 1997Received: September 11, 1996Available on J-STAGE: June 03, 2009Accepted: September 11, 1996
Advance online publication: -
Revised: -
Correction information
Date of correction: June 03, 2009Reason for correction: -Correction: DTRECEIVEDDetails: Right : 19960911
Date of correction: June 03, 2009Reason for correction: -Correction: TITLEDetails: Wrong : LECTURE Right : Design and Evaluation Frontiers of Composite Materials
Date of correction: June 03, 2009Reason for correction: -Correction: SUBTITLEDetails: Right : IV: Fatigue -Fatigue of Short Fiber Reinforced Plastics- -Fatigue under Biaxial and Multiaxial Loading-
Date of correction: June 03, 2009Reason for correction: -Correction: AUTHORDetails: Right : Masaharu IWAMOTO1), Toru FUJII2)
Date of correction: June 03, 2009Reason for correction: -Correction: AFFILIATIONDetails: Right :
1) Kyoto Inst. of Tech.
2) Doshisha Univ.
Date of correction: June 03, 2009Reason for correction: -Correction: KEYWORDDetails: Right : Fatigue, Polymer matrix composites, Short fiber, Crack growth, Bi-axial stress, Multi-axial stress
Date of correction: June 03, 2009Reason for correction: -Correction: CITATIONDetails: Right : 1) D. Dew-Hughes and J. L. Way, Composites, 2, 167 (1973). 2) M. J. Salkind, ASTM-STP 497, 143 (1972). 3) H. T. Hahn, ASTM-STP 674, 383 (1979). 4) K. L. Reifsnider, “Fatigue of Composite Materials”, Comp. Mater. Series, Vol. 4 (1991) Elsevier. 5) T. Tanimoto, S. Amijima and H. Ishikawa, Proc. of Third Conf. on Mechanical Behaviour of Materials, 3, 207 (1979). 7) K. L. Reitsnider, “Fatigue of Composite Materials”, Comp. Mater Series, p. 231 (1991) Elsevier. 9) R. Boukhill, R. Gauvin and M. Gosselin, Inter. SAMPE Sympo. and Exhibi. Book 2, Vol. 34, 2096 (1989). 10) S. W. Carswell, ASME Petroleum Division, 24, 105 (1988). 17) W. Janzen and G. W. Ehrenstein, Kunststoffe-German Plastics, 81, 31 (1991). 18) C. L. Chow and T. J. Lu, J. of Rein. Plas. and Comp., 10, 58 (1991). 19) J. K. Kocsis, Composites, 21, 243 (1990). 20) D. C. Martin, G. E. Nobak and M. G. Wyzgoski, J. Appl. Poly. Sci., 37, 3029 (1989). 25) T. Weng, A. Hiltner and E. Baer, J. of Composite Materials, 24, 103 (1989). 27) F. Ellyin and H. El-kadi, Composite Structures, 15, 61 (1990). 28) J. Awerbuch and H. T. Hahn, ASTM STP 723, 243 (1981). 29) M. J. Owen and M. S. Found, Faraday Special Discussions of the Chemical Soc., 2, 77 (1972). 30) P. Francis, D. E. Walrath, D. F. Sims and D. N. Weed, J. C. M., 11, 488, (1977). 31) Z. Hashin, Int. J. Fracture, 17, 2, 101 (1981). 32) Z. Fawaz and F. Ellyn, J. C. M., 28, (1994). 33) M. J. Owen and D. J. Rice, Composites, 12, 13 (1981). 34) S. S. Wang, E. S. -M. Chim and D. F. Socie, Trans. of STM, J. Eng. Mate. and Tech., 104, 128 (1982). 35) S. S. Wang, E. S. -M. Chim and D. F. Socie, ASTM STP 787, 287 (1982). 36) E. Krempl, J. Am. Helicopter Soc., 33, 3, 3 (1988). 37) S. Amijima, T. Fujii and M. Hamaguchi, Composites, 22, 4, 281 (1991). 39) S. Amijima, T. Fujii and T. Sagami, J. Energy Resources Tech., Trans. of ASME, 113, 235 (1991). 42) H. Kawakami, T. Fujii and Y. Morita, J. Reinforced Plastics and Composites, 15, 183 (1966).