材料の衝撃特性とその評価方法 3. 衝撃破壊力学

西岡 俊久

doi:10.2472/jsms.51.1436

Impact-Load Behavior of Materials and Its Evaluation Techniques

III:Impact Fracture Mechanics

Author information

Keywords: Dynamic fracture mechanics, Dynamic J integral, Energy release rate, Stress intensity factor, T* integral, Dynamic interface fracture, Separated dynamic J integral

JOURNAL FREE ACCESS

2002 Volume 51 Issue 12 Pages 1436-1442

DOI https://doi.org/10.2472/jsms.51.1436

Details

Published: December 15, 2002 Received: April 30, 2002 Available on J-STAGE: June 03, 2009 Accepted: April 30, 2002 Advance online publication: - Revised: -
Correction information
Date of correction: June 03, 2009 Reason for correction: - Correction: DTRECEIVED Details: Right : 20020430

Date of correction: June 03, 2009 Reason for correction: - Correction: TITLE Details: Wrong : Lecture
Right : Impact-Load Behavior of Materials and Its Evaluation Techniques

Date of correction: June 03, 2009 Reason for correction: - Correction: SUBTITLE Details: Right : III:Impact Fracture Mechanics

Date of correction: June 03, 2009 Reason for correction: - Correction: AUTHOR Details: Right : Toshihisa NISHIOKA¹⁾

Date of correction: June 03, 2009 Reason for correction: - Correction: AFFILIATION Details: Right :
1) Dept. of Ocean Mech. Eng., Kobe Univ. of Mercantile

Date of correction: June 03, 2009 Reason for correction: - Correction: KEYWORD Details: Right : Dynamic fracture mechanics, Dynamic J integral, Energy release rate, Stress intensity factor, T* integral, Dynamic interface fracture, Separated dynamic J integral

Date of correction: June 03, 2009 Reason for correction: - Correction: CITATION Details: Right : 1) T. Nishioka, JSME Int. J., 37-A, 313 (1994).
2) T. Nishioka, “Dynamic Fracture Mechanics”, (M. H. Aliabadi, ed.) p. 1 (1995) Comp. Mech. Publ.
3) T. Nishioka, Int. J. Fract., 86, 127 (1997).
4) T. Nishioka, “Fracture: A Topical Encyclopedia of Current Knowledge”, (G. P. Cherepanov, ed.), p. 575 (1998) Krieger Publ. Co..
6) M. L. Williams, J. Appl. Mech., 24, 109 (1957).
8) B. R. Baker, J. Appl. Mech., 29, 449 (1962).
9) R. J. Nuismer, Jr. and J. D. Achenbach, J. Mech. Phys. Solids, 20, 203 (1972).
10) E. P. Chen and G. C. Sih, Elastodynamic Crack Problems, (Sih, G. C., ed.), Noodhoff, 1 (1977).
11) L. B. Freund, J. Mech. Phys. Solids, 21, 47 (1973).
12) B. K. Kostrov, Int, J. Fract., 11, 47 (1975).
13) L. B. Freund, J. Mech. Phys. Solids, 20, 129 (1972).
14) T. Nishioka and S. N. Atluri, Eng. Fract. Mech., 18, 23 (1983).
15) J. D. Eshelby, Solid State Physics, III, Academic Press, 79 (1956).
16) G. P. Cherepanov, Appl. Math. Mech., 31, 467 (1967).
17) J. R. Rice, J. Appl. Mech., 35, 379 (1968).
18) B. Budiansky and J. R. Rice, J. Appl. Mech., 40, 201 (1973).
19) T. Nishioka and S. N. Atluri, Eng. Fract. Mech., 18, 1 (1983).
20) T. Nishioka and S. N. Atluri, Eng. Fract. Mech., 20, 193 (1984).
21) K. Kishimoto, S. Aoki and M. Sakata, Eng. Fract. Mech., 13, 841 (1980).
22) S. N. Atluri, Eng. Fract. Mech., 16, 341 (1982).
23) H. D. Bui, Fracture, ICF4 (Waterloo), 3, 91 (1977).
24) S. N. Atluri, T. Nishioka and M. Nakagaki, Eng. Fract. Mech., 20, 209 (1984).
25) T. Nishioka, M. Kobashi and S. N. Atluri, Comp. Mech., 3, 331 (1988).
26) T. Nishioka, T. Fujimoto and S. N. Atluri, Nucl. Eng. Design, 111, 109 (1989).
27) P. W. Lam, A. S. Kobayashi, S. N. Atluri and P. W. Tan, ASTM STP, 1359, 58 (1999).
28) H. Okada and S. N. Atluri, Comp. Mech., 23, 339 (1999).
29) S. Aoki, K. Kishimoto and M. Sakata, Eng. Fract. Mech., 19, 827 (1984).
30) M. F. Kanninen and C. H. Popelar, “Advanced Fracture Mech.”, p. 57 (1985) Oxford University Press.
31) K. Takahashi and K. Arakawa, Exp. Mech., 27, 195 (1987).
32) T. Nishioka, S. Syano and T. Fujimoto, “Adv. in Comp. Eng. & Sci., (S. N. Atluri and F. W. Brust, eds.)”, I, p. 942 (2000) Tech Science Press.
33) J. K. Kalthoff, J. Beinert and S. Winkler, “Optical Methods in Mechanics of Solids”, (Lagarde, A. ed.), p. 497 (1981) Sijthoff & Noodhoff.
34) T. Nishioka, T. Murakami, H. Kittaka, H. Uchiyama and K. Sakakura, Eng. Fract. Mech., 39, 757 (1991).
37) T. Nishioka and A. Yasin, JSME Int. J., A-42, 25 (1999).
38) T. Nishioka, S. Syano and T. Fujimoto, J. Appl. Mech. (to be published).
39) T. Nishioka, J. L. Yao, K. Sakakura and J. S. Epstein, JSME Int. J., A-43, 334 (2000).
40) S. P. Shen and T. Nishioka, J. Mech. & Phys. Solids, 48, 2257 (2000).
41) T. Nishioka, Q. Hu and T. Fujimoto, JSME Int. J., 45, 395 (2002).
42) B. Malyshev and R. Salganik, Int. J. Fract. Mech., 1, 114 (1965).
44) J. F. Yau and S. S. Wang, Eng. Fract. Mech., 20, 423 (1984).
46) T. Nishioka, R. Murakami and Y. Takemoto, Int. J. Pres. Ves. & Piping, 44, 329 (1990).
49) T. Nishioka, S. P. Shen and J. H. Yu, J. Phy. Mech Solids (to be published).
50) T. Nishioka and Z. M. Wang, Constitutive and Damage Modeling of Inelastic Deformation and Phase Transformation, (A. S. Khan, ed.), Neat Press, 741 (1999).
51) T. Nishioka and T. Fujimoto, Advances on Computational Engineering and Science, (S. N. Atluri and F. W. Brust, eds.), Tech Science Press, II, 1866 (2000).
53) L. B. Freund, “Dynamic Fracture Mechanics” (1990) Cambridge Univ. Press.

Corresponding author

Correction information

Register with J-STAGE for free!