2002 Volume 51 Issue 4 Pages 445-450
A convenient method for predicting mechanical properties of solder materials was proposed in this study.Indentation method was used to obtain mechanical properties including elastic, plastic and creep deformations.Elastic-plastic finite element method (FEM) correlated Young's modulus, E, and yield stress, σys, with unloading portion of load-displacement curve and Vickers hardness, HV, respectively. The creep properties of solders were evaluated by the Norton's law, ε=A·σn. Indentation creep and tensile creep deformations were correlated by elastic-plastic-creep FEM analysis, and the latter could be directly predicted by the former. The agreement of the prediction was confirmed for Sn-37Pb eutectic solder in the range between room temperature and 125°C. Using the proposed method, mechanical properties of lead-free solders such as Sn-3.5Ag and Sn-3Ag-0.5Cu-0-3Bi alloy systems were determined. The predicted results revealed that mechanical properties of Sn-3.5Ag and Sn-3Ag-0.5Cu alloys were sim-ilar, and that E, σys and activation energies for creep of Sn-3Ag-0.5Cu-0-3Bi lead-free solders tended to increase with increasing Bi content.
