破壊の発生・進展とその評価および抑制 3. き裂の発生・進展を抑制するための表面改質

祖山 均

doi:10.2472/jsms.53.826

Fracture, Its Evaluation and Suppression

III: Surface Modification for Suppression of Crack Initiation and Propagation

Hitoshi SOYAMA

Author information

Keywords: Surface modification, Fatigue strength, Residual stress, Peening, Surface roughness

JOURNAL FREE ACCESS

2004 Volume 53 Issue 7 Pages 826-832

DOI https://doi.org/10.2472/jsms.53.826

Details

Published: July 15, 2004 Received: January 13, 2004 Available on J-STAGE: June 03, 2009 Accepted: January 13, 2004 Advance online publication: - Revised: -
Correction information
Date of correction: June 03, 2009 Reason for correction: - Correction: DTRECEIVED Details: Right : 20040113

Date of correction: June 03, 2009 Reason for correction: - Correction: TITLE Details: Wrong : Lecture
Right : Fracture, Its Evaluation and Suppression

Date of correction: June 03, 2009 Reason for correction: - Correction: SUBTITLE Details: Right : III: Surface Modification for Suppression of Crack Initiation and Propagation

Date of correction: June 03, 2009 Reason for correction: - Correction: AUTHOR Details: Right : Hitoshi SOYAMA¹⁾

Date of correction: June 03, 2009 Reason for correction: - Correction: AFFILIATION Details: Right :
1) Dept. of Nanomechanics, Tohoku Univ.

Date of correction: June 03, 2009 Reason for correction: - Correction: KEYWORD Details: Right : Surface modification, Fatigue strength, Residual stress, Peening, Surface roughness

Date of correction: June 03, 2009 Reason for correction: - Correction: CITATION Details: Right : 7) K. Hattori, Y. Watanabe, M. Handa and J. M. Duchazeaubeneix, “Shot Peening”, p. 31 (2003) Wiley-VCH GmbH & Co.
10) R. B. Waterhouse, “Fretting Fatigue”, p. 221 (1981) Applied Science Publisher.
11) G. Leadbeater, B. Noble and R. B. Waterhouse, Proc. 6th Int. Conf. on Fracture, India, 3, 2125 (1984).
12) Y. Mutoh, T. Satoh and E. Tsunoda, ASTM STP, 1159, 199 (1992).
13) S. A. Namjoshi, V. K. Jamn and S. Mall, Trans. ASME, J. Eng. Mater. Technol., 124, 222 (2002).
16) J. A. Vaccari, American Machinist, 62 (1992).
18) B. P. Fairand and B. A. Wilcox, J. Appl. Phys., 43, 3893 (1972).
19) H. Clauer, B. P. Fairand and J. Holbrook, J. Appl. Phys., 50, 1497 (1979).
20) J. Fournier, P. Ballard, P. Merrien, J. Barralis, L. Castex and R. Fabbro, J. Phys. III France, 1, 1467 (1991).
21) G. Banas, H. E. Elsayed-Ali, F. V. Lawrence, Jr. and J. M. Rigsbee, J. Appl. Phys., 67, 2380 (1990).
22) R. Specht, F. Harris, L. Lane, D. Jones, L. Hackel, T. aleski, J. Halpin, M. Hill and W. Wbbenhorst, Shot Peening, 474 (2003).
23) Y. Sano, M. Kimura, N. Mukai, M. Yoda, M. Obata and T. Ogisu, Proc. Int. Forum on Advanced High-Power Lasers and Applications, 294 (1999).
25) Y. Sano, M. Kimura, K Sato, M. Obata, A. Sudo, Y. Hamamoto, S. Shima, Y. Ichikawa, H. Yamazaki, M. Naruse, S. Hida, T. Watanabe and Y. Oono, Proc. 8th Int. Conf. on Nuclear Engineering, ICONE-8441 (2000).
26) H. Blickwedel, H. Haferkamp, H. Louis and P. T. Tai, Proc. 7th Inter. Conf. on Erosion by Liquid and Solid Impact, 31-1 (1987).
27) H. K. Tönshoff, F. Kroos and M. Hartmann, Proc. 8th American Water Jet Conf., 473 (1995).
28) S. R. Daniewicz and S. D. Cummings, Trans. ASME, J. Eng. Mater. Technol., 121, 336 (1999).
37) H. Soyama and M. Asahara, J. Mater. Sci. Lett., 18, 1953 (1999).
38) H. Soyama, J. D. Park and M. Saka, Trans. ASME, J. Manuf. Sci. Eng., 122, 83 (2000).
39) H. Soyama, JSME Int. J., 43A, 173 (2000).
40) H. Soyama, T. Kusaka and M. Saka, J. Mater. Sci. Lett., 20, 1263 (2001).
41) H. Soyama, K. Saito and M. Saka, Trans. ASME, J. Eng. Mater. Technol., 124, 135 (2002).
43) H. Soyama, K. Sasaki, D. Odhiambo and M. Saka, JSME Int. J., 46A, 398 (2003).
44) D. Odhiambo and H. Soyama, Int. J. Fatigue, 25, 1217 (2003).
45) H. Soyama, Trans. ASME, J. Eng. Mater. Technol., 126, 123 (2004).
46) J. C. Rawers, R. A. McCune and J. S. Dunning, Metal. Trans., 22A, 3025 (1991).
49) H. Soyama, A. Lichtarowicz, T. Momma and E. J. Williams, Trans. ASME, J. Fluids Eng., 120, 712 (1998).
50) H. Soyama and H. Kumano, J. Testing and Evaluation, 30, 421 (2002).
53) D. O. Macodiyo, H. Soyama and M. Saka, J. Mater. Sci. Lett., 22, 115 (2003).
54) S. Taira and K. Honda, Bulletin Jap. Soc. Mech. Eng., 4, 230 (1960).
55) S. Taira, Exp. Mech., 13, 449 (1973).
56) R. E. Little, ASTM STP, 511, 29 (1972).

Corresponding author

Correction information

Register with J-STAGE for free!