2021 Volume 77 Issue 2 Pages I_727-I_732
In this study, the lift pressures acting on a horizontal slab due to traveling and overlapping waves were analyzed using a gas-liquid two-phase numerical wave models, and the pressure reduction effect by adding holes to the slab was investigated. As a result, it was confirmed from the numerical simulation that the pressure caused by the air compression was generated when waves did not reach to the horizontal plate. In addition, it was found that the pressure due to air compression was reduced to some extent by adding an aperture, and the reduction rate depended on the relative clearance and aperture ratio. For future studies, the response of the structure and the multi-directional irregular waves should be investigated to improve the versatility of the practical design.