Abstract
The jet flow from an orifice nozzle shows a particular velocity profile with a large velocity gradient at the edge of the jet. Setting an orifice nozzle, second one, with a resonance room just after the first orifice nozzle the jet causes resonance phenomena and the resonance frequency depends on the jet velocity and the volume of resonance room. In this study, a notched nozzle was used as the second one to enhance the flow disturbance or fluctuation, and the effects of the notched nozzle on the mean and fluctuating velocities and the mixing or diffusion characteristics of the jet itself and with the surroundings were examined experimentally using a hot wire measurements. As a result, it was made clear that under a same operation power the flow rate near the nozzle exit of a notched resonance jet is larger than those of an orifice and resonance jets, for example, at x/d = 0.2 (x: distance from the nozzle exit to the downstream, d: nozzle diameter) it is about 2.5 and 1.3 times of theirs, respectively, and others.
