Abstract
This paper presents a study on the effect of standard pressure angle on the bending fatigue strength of helical gears. The root stresses of meshing helical gears of various pressure angles, helix angles and whole tooth depths were calculated by using the approximate equations for deflection and bending moment due to a concentrated load on gear teeth of full depth and long teeth with various pressure angles and Kubo and Umezawa's method. Bending fatigue tests were performed on helical gears of full depth teeth of various pressure angles and helix angles. On the basis of these results, the effects of pressure angle, helix angle and whole tooth depth on the root stresses and bending fatigue strength of helical gears were clarified to a considerable extent.
