Real-Time Measurement of Internal Strain in FRP Laminates with Optical Fiber Sensors in Autoclave Molding

Abstract

In the present study, real-time measurement of internal and residual strains in GFRP laminates with an optical fiber strain sensor was performed in an autoclave molding. An Extrinsic Fabry-Perot Interferometric (EFPI) type optical fiber strain sensor was embedded into prepreg sheets before the molding. The ion viscosity and the temperature of the epoxy resin matrix were also measured simultaneously with the internal strain measurement. The results of the experiments showed that the internal and residual strain of GFRP laminates during the molding could be monitored by the optical fiber sensor embedded in the parallel direction to the reinforcing fibers. It was also found that the circumstances around the embedded optical fiber strain sensor should be taken into account for the interpretation of the measured internal and residual strain.