2001 Volume 67 Issue 663 Pages 3445-3453
Electromagnetic acoustic transducers (EMATs) can transmit and detect ultrasonic waves in a conductive specimen out of any contact with it. This process can be given theoretical modeling and formulation based on elastodynamics and electromagnetics. It suggests the possibility of quantitative nondestructive evaluation using EMATs. This research deals with a numerical method of flaw identification from a receiver signal obtained by EMATs. Experimental results of receiver signals agree well with numerical ones, which verified the mathematical model of the inspection process. Flaw identification is formulated as a problem of parameter optimization. To avoid being trapped in a local optimum, initial parameters were successfully evaluated from the height and the time period of peaks in the receiver signals. Flaw parameters were identified from receiver signals obtained from numerical simulations and experiments, which verified the method of flaw identification presented here.