Abstract
This paper investigates and proposes one advantageous function of a power packet dispatching system, which has been proposed by authors' group with being apart from the conventional power distribution system. Here is focused on the feature on safety of power packet dispatching which covers two aspects: information safety (protect the information of packet from attackers) and power safety (keep loads safe regarding supplied power from packet). For the purpose of achieving the information safety and the power safety, we introduce simple modulations of power packets before sending them. In particular, in order to protect the information of packets, partial packet modulation is proposed first, i.e., modulating partial information tags of packets. Modulation scheme based on chaotic signal is one possibility for this purpose and we adopt the differential chaos shift keying (DCSK) scheme in this paper. Next, the power safety can be achieved by applying pulse width modulation (PWM) to the payload of packets. Meanwhile, considering the effect of the noise on the packet dispatching, further modulation of the payload using the DCSK scheme is proposed, which can spread the spectrum of the noise. Consequently, we introduce the concept of whole packet modulation, in which PWM is applied to the payload of packets first, and then modulation using the DCSK scheme is applied throughout the whole packet. In this manner, both the information safety and the power safety can be achieved and the spectrum of noise is spread as well. Additionally, it is worth mentioning that the rigorous examination of the modulation method is not the target in this moment.
