QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY
Print ISSN : 0288-4771
Development of the Induction Heating Stress Improvement for a Nozzle with a Thermal Sleeve
Shinji SakataKunio EnomotoTasuku ShimizuWataru Sagawa
Author information
JOURNALS FREE ACCESS

1988 Volume 6 Issue 1 Pages 64-70

Details
Abstract

The Induction Heating Stress Improvement (IHSI) technique is regarded as one of the most effective remedies for intergranular stress corrosion cracking (IGSCC) cocuring in the heat affected zone (HAZ) of susceptible stainless steel in some boiling water reactor piping systems. In this process, cooling water must flow at a velocity high enough to keep the inside surface of the pipe relatively cool, creating a high temperature gradient through the pipe wall. However, nuclear plant pipings, where forced flowing during this process may be difficult, have been welded. This paper presents computer simulation analyses and experimental verifications of post-IHSI residual stress distribution of the welded portion of a nozzle with a thermal sleeve, where forced water cooling is difficult. From these analyses and experiments a new IHSI technique is developed. This technique consists of new heating method which has temperature grandient through both the pipe wall and longitudinal direction.

Information related to the author
© by JAPAN WELDING SOCIETY
Previous article Next article
feedback
Top