Nihon Reoroji Gakkaishi
Online ISSN : 2186-4586
Print ISSN : 0387-1533
ISSN-L : 0387-1533
ORIGINAL ARTICLE
Flow Properties of Microbubble/Polyethylene Glycol Mixtures Passing through Orifices and Slits
Akiomi UshidaTomiichi HasegawaMasato KawamiHiroshige UchiyamaTakatsune NarumiRyuichi Kayaba
Author information
JOURNAL FREE ACCESS

2012 Volume 40 Issue 2 Pages 61-68

Details
Abstract

Flows of microbubble/liquid mixtures have been extensively studied in both theoretical and applied research, and important results, such as drag reduction effects, have been reported. However, the majority of researchers have focused on only mixtures of microbubbles and water. Studies on microbubble mixtures in complex liquids, for example, for surfactant solutions and polymer solutions, are limited. The present study considers the flow of microbubble mixtures in a dilute polymer solution. In the present research, microbubbles (particle size: 20 μm) are suspended in either water or a dilute solution of polyethylene glycol. The liquids and suspensions were passed through various sizes of orifices (200 μm to 1.0 mm) and slits (397 μm and 596 μm), pressure drops were measured, and elongational stresses were estimated. Pressure drops of the polyethylene glycol solution were less than those of water, and the measured pressure drops of both microbubble mixtures were greater than those of the polyethylene glycol solution. As a result, polymer chains in the polyethylene glycol solution are considered to be laden with microbubbles, and this effect is seen in the corresponding elongational stress estimates.

Content from these authors
© 2012 The Society of Rheology, Japan
Previous article Next article
feedback
Top