Abstract
The aim of this study is to establish a simple method for evaluating the extent of damage to geogrid reinforced soil walls (GRSWs) subjected to earthquakes. Centrifuge tilting and shaking table tests were conducted to investigate the seismic behaviour of GRSWs, with special focus on the effects of the tensile stiffness of the geogrids, the pullout characteristics and the backfill materials. As a result, it was found that GRSWs showed large shear deformation in the reinforced area after shaking, that such deformation was influenced by the tensile stiffness of the geogrids, the pullout resistance and the deformation modulus of the backfill material, and that finally slip lines appeared. However, the GRSWs maintained adequate seismic stability owing to the pullout resistance of the geogrids, even after the formation of slip lines. It is considered that such slip lines appeared due to the failure of the backfill material. Since the maximum shear strain occurring in the backfill can be roughly estimated from the inclination of the facing panels, using a simple plastic theory, it is possible to evaluate whether the backfill has reached its peak state or not. The formation of slip lines observed in the centrifuge model tests could be well explained by this method. Finally, the method is proposed to estimate the failure sections in the GRSWs using a Two Wedge analysis.
