Abstract
Ka-band communications is one of the most important technologies for increasing the amount of data acquired in deep space missions. As a first step toward developing this technology, a Ka-band extender was attached to an existing X-band transponder. The Ka-band extender can generate Ka-band signals from the transponder’s signals. The extender is designed so as to reuse design elements of the X-band transponder. This approach ensures reliability of the extender without additional qualification, lowers production costs, and allows for flexibility in the Ka-band extender configuration. For instance, the minimum configuration is a simple upconverter, which is realized by sharing circuits to the greatest extent possible with the transponder. The extender is compatible with the Ka-band specifications in Consultative Committee for Space Data Systems standards. Properties such as a flexible coherent ratio, high-speed analog and digital modulation, and ultralow phase noise for radio science missions are provided. Here, a breadboard model of the Ka-band extender was evaluated in experiments. The Allan variance of the Ka-band output signal was less than 1 × 10-12 (at 1 s), 1 × 10-13 (at 10 s), and 1 × 10-14 (at >100 s) when an external reference signal was used. The Allan variance degradation and phase noise degradation, which were caused by the internal phase locked loop or frequency translation loop, were also measured. The measured phase noise degradation was about 25 dB from the theoretical value.
