Tetsu-to-Hagane
Online ISSN : 1883-2954
Print ISSN : 0021-1575
ISSN-L : 0021-1575
Regular Article
Utilization of High VM Coal in the Reduction of Carbon Composite Iron Ore Agglomerates
Hidetoshi TanakaTakao Harada
Author information
JOURNAL OPEN ACCESS

2008 Volume 94 Issue 2 Pages 35-41

Details
Abstract
Since high VM coal is inexpensive and deposits are abundant all over the world, the use of high VM coal is highly desirable in the carbon composite iron ore reduction process. However, when high VM coal is used, deterioration of DRI strength will occur. In order to solve this problem, different carbonization conditions were applied to high VM coal and different agglomeration methods were tested. As a result, when the non-carbonized coal was used and iron ore/coal composite briquettes were made under high pressure, high strength DRI was obtained. By this method, the porosity was effectively reduced in the carbon composite agglomerates, internal heat transfer was improved, and sintering of reduced metal was promoted.
Content from these authors
© 2008 The Iron and Steel Institute of Japan

This article is licensed under a Creative Commons [Attribution-NonCommercial-NoDerivatives 4.0 International] license.
https://creativecommons.org/licenses/by-nc-nd/4.0/
Next article
feedback
Top