Tetsu-to-Hagane
Online ISSN : 1883-2954
Print ISSN : 0021-1575
ISSN-L : 0021-1575
Simulation Model of Burden Distribution in Blast Furnace Equipped with Bells and Movable Armors
Hiroaki NISHIOTatsuro ARIYAMAMichitaka SATO
Author information
JOURNAL OPEN ACCESS

1987 Volume 73 Issue 11 Pages 1527-1534

Details
Abstract
A reliable simulation model of burden distribution in blast furnace was developed. This model has the following features:
(1) A wide range of burden mixtures of sinter and pellets may be given.
(2) A variety of charging conditions such as coke base, ore/coke, several combinations of coke and ore batches, movable armor settings, and a stock line may be given.
(3) Burden profiles will be reproduced with an exellent similarity by use of classification of burden profiles into five patterns.
(4) The influence of burden bed profiles prior to charging on burden distribution is taken into account.
(5) The reduction of surface angle with the increase of gas flow rate, and/or with the descent of burden in stack is taken into account.
Content from these authors
© The Iron and Steel Institute of Japan

This article is licensed under a Creative Commons [Attribution-NonCommercial-NoDerivatives 4.0 International] license.
https://creativecommons.org/licenses/by-nc-nd/4.0/
Previous article Next article
feedback
Top