Tetsu-to-Hagane
Online ISSN : 1883-2954
Print ISSN : 0021-1575
ISSN-L : 0021-1575
Scrapmelting Using a Shaft Type Furnace with Coke Packed Bed Injected with Highly Oxygen Enriched Air and a Large Quantity of Pulverized Coal
Yasuo KAMEITomio MIYAZAKIHideyuki YAMAOKA
Author information
JOURNAL FREE ACCESS

1993 Volume 79 Issue 2 Pages 139-146

Details
Abstract

Scrapmelting test was performed using an experimental melting furnace with coke packed bed injected with highly oxygen enriched air and a large quantity of pulverized coal and the following results were obtained.
1) Scrap (100% of material) was able to be melted by using coke for blast furnace.
2) The pig iron whose quality is equal to that of the blast furnace can be produced with high carburization and high desulfurization.
3) The fuel rate of 240 to 290 kg/t and productivity of 14.7t/d/m3 were obtained.
4) The fuel rate can be decreased and productivity can be increased by post combustion with air injection from the shaft wall.
Based on the above mentioned results, the comparison of energy consumption of scrap melting process such as this process, electric furnace and basic oxygen furnace was made and a possibility was confirmed that the energy consumption of this process was the least among them.
Therefore it is concluded that this process can be one of the attractive scrap melting methods when the scrap utilization is required in large quantities.

Content from these authors
© The Iron and Steel Institute of Japan
Previous article Next article
feedback
Top