Tribology Online
Online ISSN : 1881-2198
ISSN-L : 1881-218X
Article
High Pressure Rheology of Lubricants (Part 5)
—Derivation of van der Waals Type Viscosity Equation—
Masato Kaneko
Author information
JOURNAL OPEN ACCESS

2022 Volume 17 Issue 4 Pages 257-275

Details
Abstract

The Walther equation is often used for the viscosity temperature characteristics of lubricants. However, it was found that it cannot be applied to high pressure viscosity. In this study, the relationship between viscosity, temperature and pressure was analyzed. As a result, viscosity at each pressure was found to be negatively proportional to the square of temperature, and linear equations converges at absolute zero were derived. In parallel, a thought experiment was conducted on the viscosity of ideal liquid. It was found that the absolute zero viscosity (ηt=0) of ideal liquid is constant regardless of the pressure. This is consistent with the convergence point at absolute zero of the linear equation in the above analysis. Furthermore, a high pressure viscosity temperature linear equation incorporating the pressure was derived. This eqaution is a van der Waals type viscosity equation consisting of three intrinsic constants: absolute zero viscosity ηt=0 [mPa·s], viscosity constant 1/B [GPa/K2] and pressure constant C/B [GPa]. It was found that this is liquid viscosity equation. This equation is also ideal liquid viscosity equation. Furthermore, C/B was found to be equivalent to PR [GPa] of liquid state equation. By this, the high pressure viscosity of lubricant can be estimated from the derived van der Waals type viscosity equation.

Content from these authors
© 2022 by Japanese Society of Tribologists

This article is licensed under a Creative Commons [Attribution-NonCommercial-NoDerivatives 4.0 International] license.
https://creativecommons.org/licenses/by-nc-nd/4.0/
Previous article Next article
feedback
Top