Abstract
Poly(vinyl chloride) membrane sensors for Ca(II) ions were constructed based on bilirubin (1,3,6,7-tetramethyl-4,5-dicarboxyethy-2,8-divinyl-[b-13]-dihydrobilenone) as a neutral carrier in the presence of various plasticizers (o-nitrophenyloctyl ether, dioctyl phethalate and dibutyl sebacate), which were used as solvent mediators to incorporate the carrier into the membranes. The role of plasticizers as a medium of complexation was demonstrated. The influences of an anionic excluder, the pH and foreign ions were investigated. The selectivity coefficients were measured by a separate solution method. Among the plasticizers used, o-nitrophenyloctyl ether gave the best selectivity in the presence of large concentrations of alkali and alkaline earth’s metal ions. Using sensor number I, a linear calibration graph with a good Nernstian slope of 29.5±0.8 mV was obtained for Ca(II) concentrations of 5×10-7-10-2 mol l-1 with a detection limit of 3×10-7 mol l-1 (12 ppb). The sensor can be used for more than 3 months with good reproducibility and a fast response time of 10 s. The developed sensor has been successfully applied to the analysis of some pharmaceutical formulations, baby-food products and human plasma. Moreover, it can be used as an indicator sensor in the potentiometric titration of Ca(II) with EDTA.
