Speciation of Antimony by Preconcentration of Sb(III) and Sb(V) in Water Samples onto Nanometer-size Titanium Dioxide and Selective Determination by Flow Injection-Hydride Generation-Atomic Absorption Spectrometry

Abstract

A novel method for prevention of the oxidation of Sb(III) during sample pretreatment, preconcentration of Sb(III) and Sb(V) with nanometer size titanium dioxide (rutile) and speciation analysis of antimony, has been developed. Antimony(III) could be selectively determined by flow injection-hydride generation-atomic absorption spectrometry, coexisting with Sb(V). Trace Sb(III) and Sb(V) were all adsorbed onto 50 mg TiO₂ from 500 ml solution at pH 3.0 within 15 min, then eluted by 10 ml of 5 mol/l HCl solution. One eluent was directly used for the analysis of Sb(III); to the other eluent was added 0.5 g KI and 0.2 g thiourea to reduce Sb(V) to Sb(III), then the mixture was used for the determination of total antimony. The antimony(V) content is the mathematical difference of the two concentrations. Detection limits (based on 3σ of the blank determinations, n = 11) of 0.05 ng/ml for Sb(III) and 0.06 ng/ml for Sb(V), were obtained.