Engineering in Agriculture, Environment and Food
Online ISSN : 1881-8366
ISSN-L : 1881-8366
Effect of inlet temperature in combination process with micro wet milling and spray drying to physical and chemical properties of white button mushroom (Agaricus bisporus) powder
Kodai KUSUNOKIYutaka KITAMURA Mito KOKAWAMuliasari KARTIKAWATI
Author information
JOURNAL OPEN ACCESS

2024 Volume 17 Issue 4 Pages 125-132

Details
Abstract
Combining micro wet milling (MWM) and spray drying (SD) to powder white button mushroom (WBM) is a promising technique to give a higher quality product. The objectives were to determine the optimal number of passes in MWM process and to investigate the effect of different inlet temperatures in combination of MWM and SD process on the physical and chemical properties of WBM powders. The inlet temperature of SD was set to 160, 170, 180, 190 °C. The result showed 3 passes were sufficient to reduce the particle size and there was no significant difference between different inlet temperatures on physical properties of WBM powder, except for the color. MWM and SD process with inlet temperature 180 °C was proposed for powdering WBM.
Content from these authors
© 2024 Asian Agricultural and Biological Engineering Association

この記事はクリエイティブ・コモンズ [表示 4.0 国際]ライセンスの下に提供されています。
https://creativecommons.org/licenses/by/4.0/deed.ja
Previous article Next article
feedback
Top